Send an Enquiry

Your Name:

Your Email:

Your Phone Number:

Your Message:

MasterSeal 550

MasterSeal 550

Polymer modified cementitious waterproofing coating

Packaging Size

  • MasterSeal 550 is available in 6kg & 20kg ready to use pack.

Applications

  • Balconies
  • Water retaining tanks
  • Sunken area
  • Protection area

Features and Benefits

  • Water resistant to 7 bar head
  • Excellent bond strength
  • Protection from corrosion
  • Tough but flexible film

User Guildelines

Mix both the components using slow speed stirrer to lumps-free consistency. Apply using brush in 2 coats at right angle to each other.

Coverage

1.8 kg/m2 at 1mm thickness.

Request For Quote

MasterSeal SBR 2

MasterSeal SBR 2

MasterSeal SBR 2 is a milky-white, Styrene-Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties. When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.

Uses

  • Concrete repair: Spalled concrete, repairing floors, beams and pre-cast slabs, chajjas etc.
  • Bond Coat: For bonding new concrete to old concrete, plaster, stone/brick masonry.
  • Plaster repair: For repairing plaster or making water proof plaster which is better than normal plaster.
  • Floor screeds and toppings: Abrasion resistant and non-dusting floors.
  • Waterproofing: Basements side walls and rafts, lift pits, inspection pits, sunken/overhead water tank, sunken portions of bathrooms and toilets, balconies, chajjas, exposed roofs before finished screed.
  • Other typical applications: Bedding tiles, fixing or re-fixing slip bricks.

Features and Benefits

  • Multiple applications: Robust product that is economical, easy to handle and store.
  • Easy to Mix: Faster mixing to enhance worker efficiency.
  • Shrinkage/crack control: High flexural / tensile strength to control cracking.
  • Mortar modifier- Improved flexibility, no bleeding, lower water cement ratio and high resistance to water penetration.
  • Improves physical/mechanical properties – higher abrasion resistance, good adhesion to building materials similar thermal characteristics to concrete.
  • Corrosion control: Prevents corrosion of embedded steel.
  • High Dispersion technology: Allows for better workability at slightly reduced water

Request For Quote

MasterSeal 777

MasterSeal 777

MasterSeal 777 is an innovative liquid admixture designed specifically to allow superior workability in concrete / mortar mixes with reduced water and also achieve high resistance to water ingress. It is based on a specially formulated polymers and compatible with all types of cement and binders (like fly ash, ground granulated slag, silica fume, metakaolin, etc).

Uses

  • MasterSeal 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction. Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures.
  • MasterSeal 777 is used as a dual action admixture combining both the waterproofing cum plasticizing effect for cement concrete, mortars and plasters.

Features and Benefits

  • Liquid – easy to use.
  • Low dosage – Economical.
  • Water reducing admixture - Improves workability, cohesion and pump ability, reduces segregation.
  • Improved surface finish.
  • Improved compressive strengths
  • Water proofing admixture - Provides resistance to water penetration either under hydrostatic pressure or capillary absorption.
  • Increased durability.

Request For Quote

MasterSeal  1414

MasterSeal 1414

Description

MasterSeal 1414 is a solvent free, high performance, long potlife, versatile epoxy bonding agent. MasterSeal 1414 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation.

Uses

  • Structural bonding of new to old concrete
  • Steel bonding
  • Grouting dowels

Features and Benefits

  • Adheres to wet or damp surfaces – Wide application area
  • Solvent free – Low VOC and non-shrink
  • Pre-proportioned packaging – No job site errors
  • Multi-purpose binder – Many uses
  • Low viscosity – Easy to apply as primer
  • High abrasion and chemical resistance – Can be used as wearing surface

Packaging Size

  • MasterSeal 1414 comes in 1 kg and 3 kg kit sizes

Request For Quote

MasterSeal  2200

MasterSeal 2200

Description

MasterSeal 2200 is a solvent free, high performance, non-slumping epoxy mortar and adhesive. MasterSeal 2200 can be used as a bedding mortar, thixotropic adhesive and non-sag concrete repair mortar.

Uses

  • Bedding of bridge beams or steel bridge bearings
  • Repairing surface defects in concrete in horizontal, vertical and overhead applications
  • Fining of injection ports for MasterInject resins
  • Bonding of dowels, bolts and anchors into concrete
  • Rapid structural repair of concrete
  • Repair of concrete posts in situation

Features and Benefits

  • Adheres to concrete surfaces – Allows rapid repair of concrete
  • Solvent free – Low VOC and non-shrink
  • Pre-proportioned packaging – No job site errors
  • Easy application – No primer necessary
  • High abrasion, impact and chemical
  • resistance – Can be used as contact surface in aggressive environments
  • Cures hard at low temperatures – Wide application range

Packaging Size

  • MasterSeal 2200 comes in a 6 kg kit

Request For Quote

Check Other Products